Travel back and forth to the hometown requires the preparation of a mature vehicle. One of them because of the diverse roads and traffic conditions that much-colored congestion.
One of the most vulnerable components is the coupling. But not a problem on the course alone, the clutch cable can be problematic.
Steps for Car Trouser Trouble, Do It.
“Usually the movement of teeth is rather difficult or hard. This is because the cable is loose. Pressure on the clutch pedal is also hard. A car that is less maintenance and aged is usually easy to deal with this problem in the season going home, “said Arpan mechanic.
To handle this problem usually for mechanical couplings, it is advisable to carry a backup clutch cable. But there is a first handler that can be done by setting the owner who is in the gearbox.
“If the teeth enter one can still, it means still can be an adjustment. Owners live set the bolt at the bottom of the gearbox, to the left add a pedal height and vice versa, “said Arpan.
Then another problem about the clutch cable that can happen is the cable break in the middle of the road. For this driver should not panic. In addition to requesting the help of the nearest emergency crane or emergency workshop via the telephone number, there is something to do.
Turn the engine off until the mover does not rotate. Insert transmission into gear 2, then turn on the machine. Gear two are needed so that the car can move slowly and smoothly.
Continue to run the car while adjusting the gas pressure, set a distance of about 40 to 100 meters so as not to collide with other vehicles. Walk down a slow lane to meet the nearest garage.
“This problem is usually the case with cars over the age of five years or rarely checked into the garage. Though an examination of this section is quite important, especially the condition of jamming that makes the transmission work harder, “said Arpan.